Graphene Integrations product lineup of pre-mixed graphene additives

To request graphene samples from Graphene Integrations, tell us what you make, the carrier your product uses (water, solvent, resin or oil), the property you want to improve, the test you will use and your expected volumes. We then suggest a dispersion and starting dose and quote R&D samples, so your team can test against its own baseline before any scale-up.

A clear request gets you the right sample the first time and makes the trial result easier to interpret.

What information should I include in a sample request?

  • Your product or material, for example a gear oil, epoxy adhesive, waterborne coating or ready-mix concrete.
  • The continuous phase or carrier, such as water, solvent, resin, oil or cement.
  • The property to improve, such as wear, strength, barrier or heat transfer.
  • The test method you will use, ideally the same one you use for your current product.
  • Your mixing method and process temperatures.
  • Expected volumes if the trial succeeds.
  • Your timeline.

Use the graphene samples page or the quote request form.

What happens after I send the request?

  1. We review the material and goal. We match a carrier to your product.
  2. We suggest a product and starting dose. Most of our additives are dosed at 1% to 7% by weight, depending on the job. Concrete is validated at 5% by weight of cement, and ThermaGraph™ is a complete fill rather than a dose.
  3. We quote the samples. Pricing and samples are by quote.
  4. You test against your own baseline.
  5. We review results with you and decide the next step: adjust, scale up or stop.

Which products can I sample?

Our store lists the additives and dispersions available, including the concrete additive, motor oil, gear oil, hydraulic and grease additives, paint, plastic, rubber, adhesive, battery, 3D printing filament and textile additives, ThermaGraph™ and ThermaGraph-D™ coolants, and water, solvent, resin, oil and custom carrier dispersions. For ThermaGraph, a 30-day sample can be requested from the product page.

How should I plan the trial before the sample arrives?

Prepare a fresh baseline batch, decide two or three dose levels, and agree what result would count as a success. Change only the additive between batches and record everything. Our graphene additive trial guide explains each step, and our dosing guide helps pick the levels.

What documents come with a sample?

Each product has a technical data sheet, a safety data sheet and a sell sheet, linked from its product page. Read them before the sample arrives; our guide to reading a graphene TDS and SDS shows what to look for.

Can international companies request samples?

Yes. We supply manufacturers outside the US with the same products, documents and technical support, and quote shipping and export documents with the sample. See global graphene supply.

What results have other trials produced?

Results depend on the formulation, which is why we test in your material. Our published results are on the case studies page, including +67.7% compressive strength at 5% by weight of cement in independent third-party testing (2023) for concrete, and up to 42% smaller four-ball wear-scar diameter and 26% higher weld load in independent lab testing for our lubricant additive.

What makes a sample request faster to quote?

The most common delays are a missing carrier, an unclear target property and no test method. If you can, attach your current product's TDS or a short description of its formulation type, and say which result would count as a success. That lets us suggest the right product and dose on the first reply.

Frequently asked questions

Are graphene samples free?

Samples are quoted. Pricing depends on the product, quantity and destination.

Do you sell graphene powder samples?

No. We supply graphene only pre-dispersed in a carrier, never as dry powder.

How much sample do I need?

Enough for your baseline comparison at two or three dose levels, with enough specimens to see real differences. Tell us your batch size and we will suggest a quantity.

What if my carrier is unusual?

Ask about a custom carrier dispersion matched to your process.

Request a quote, samples or a spec sheet

Tell us your material, the property you want to improve, the carrier you use (water, solvent, resin or oil) and your volumes. Pricing and samples are by quote. Call 704-659-3682 or request a quote, samples or a spec sheet / SDS.