Graphene Concrete Additive
A graphene concentrate for concrete, supplied ready to add so it fits into existing batching and mixing.
- Category
- Concrete & Construction
- Application
- Ready-mix and precast concrete, tested in your own mix design. Any change to a mix design should be confirmed by the project engineer.
- Carrier
- Water-compatible concentrate, added with the mix.
- Typical dose
- Loading depends on mix design; validated at 5% by weight of cement . See the technical data sheet.
- SKU
- GI-CON-1GAL (1 gal jug)
GI-CON-5GAL (5 gal pail)
GI-CON-55GAL (55 gal drum)
Sizes: 1 gal jug, 5 gal pail, 55 gal drum
Request a quote for pricing, lead time and the right dose for your job.
Downloads
Patent pending. Made in the USA. Manufacturer: Graphene Integrations, Charlotte, NC.
About this additive
Our graphene concentrate gave 67.7% higher compressive strength at 5% by weight of cement, in independent third-party testing (2023). It is supplied ready to add, so it fits into existing batching and mixing. Read the full graphene concrete results.
Results depend on the cement, aggregates, water-cement ratio and curing, so we work with producers who test graphene in their own mixes.
Concrete strength and embodied carbon
Cement is the binder in concrete. Its production releases CO₂ through limestone conversion and energy use, as explained by the IEA. That makes cement quantity an important part of a concrete carbon assessment.
GI’s additive achieved +67.7% compressive strength in third-party testing at the tested 5% supplied-additive dose by cement weight, not 5% pure graphene. This validated strength result supports investigating lower-cement mixes; it does not establish how much cement can be removed. Candidate mixes must meet the same required performance.
Conditional example: if 100 kg of Portland cement is actually avoided at the same required performance, gross avoided cement A1–A3 impact is 100 × 0.919 = 91.9 kg CO₂e. The 100 kg is an example assumption, not a reduction demonstrated by GI. The official US industry-average Portland cement EPD, revised July 2026, Table 4, gives 0.919 kg CO₂e/kg using 2019 production data, covering A1–A3, raw materials through manufacturing—not a current-year plant measurement or whole-life concrete footprint. CO₂e means carbon dioxide equivalent.
This is gross avoided cement-production impact, not measured GI net savings. Net savings require matched-performance mix validation and a consistent lifecycle comparison including additive manufacture, carrier, packaging, transport and all changed mix inputs. Unknown additive impacts are not zero. The strength result does not automatically establish cement reduction, longer service life or carbon capture.
Frequently asked questions
What strength gain did testing show?
67.7% higher compressive strength at 5% by weight of cement, in independent third-party testing (2023). Results depend on your cement, aggregates, water-cement ratio and curing.
How much do I add?
Loading depends on mix design; validated at 5% by weight of cement . See the technical data sheet. Confirm any change to a mix design with the project engineer and testing on that mix.
Is it a powder?
No. It is a water-compatible concentrate added with the mix, never a dry powder.
Does it fit my batching process?
It is supplied ready to add, so it fits into existing batching and mixing.
More in Concrete & Construction
-
In development
Graphene Rebar
Graphene-based reinforcement rods, in development as an alternative to steel rebar. Learn more -
Graphene Motor Oil Additive
A graphene additive for motor oils, supplied pre-mixed in an oil-based carrier so it blends straight into your oil. View product -
Graphene Gear Oil Additive
A graphene additive for gear oils, pre-mixed in an oil-based carrier for heavily loaded gear contacts. View product -
Graphene Hydraulic Fluid Additive
A graphene additive for hydraulic fluids, pre-mixed in an oil-based carrier for pumps, valves and cylinders. View product -
Graphene Grease Additive
A graphene additive for greases, pre-mixed in an oil-based carrier for blending into bearing and industrial greases. View product -
Graphene Coolant Additive
A graphene additive for liquid cooling loops, supplied pre-mixed in a water-based carrier. View product




