Graphene dispersion sample in a lab beaker

Before testing a graphene additive, read two documents: the technical data sheet (TDS), which tells you what the product is, how to dose and mix it and how to store it, and the safety data sheet (SDS), which tells you its hazards, safe handling, PPE and emergency measures. Together they answer most of the questions that decide whether a trial runs smoothly.

Every Graphene Integrations product page links to its TDS, SDS and sell sheet, and the current versions are also available on request.

What does a graphene TDS tell me?

A technical data sheet typically covers:

  • Product description and intended applications.
  • Carrier: the liquid the graphene is dispersed in, such as water, solvent, resin or oil. For our lubricant additives, the carrier is graphene integrated into oleic acid and monomer.
  • Graphene content or dose guidance. Most of our additives are dosed at 1% to 7% by weight, depending on the job. ThermaGraph™ is different: it is a complete fill with 0.5–1.5 wt% graphene stated on the COA.
  • Mixing instructions: where and how to add the product, and for how long to mix.
  • Physical properties relevant to handling.
  • Packaging, storage and shelf life.

For concrete, the TDS explains that our additive is validated at 5% by weight of cement and that loading depends on mix design. See the concrete mixing instructions.

What does the SDS tell me?

The SDS follows a standard 16-section format. The sections most relevant to a trial are:

  • Section 2, hazards identification: hazard classification and label elements.
  • Section 3, composition: what the product contains, including the carrier.
  • Section 7, handling and storage.
  • Section 8, exposure controls and PPE.
  • Section 10, stability and reactivity.
  • Section 13, disposal.
  • Section 14, transport information.

The hazards of a graphene dispersion are often driven largely by its carrier, so a water-based dispersion and a solvent-based one can have very different SDS content.

Why does the carrier matter so much?

The carrier decides whether the additive is compatible with your material, how it affects your formula's water or solvent balance, and what hazards it brings. Match the carrier to your continuous phase. Our guide to choosing a graphene dispersion carrier explains the options.

Is graphene powder a handling concern with these products?

We supply graphene only pre-dispersed in a liquid carrier, never as dry flake or powder, so there is no dry graphene powder to handle. Follow the mixing, storage and safety instructions on the TDS and SDS supplied with each product. Product pages also list basic handling notes, such as shaking well before use and avoiding contact with eyes and skin.

What should I check before the trial starts?

  1. The carrier is compatible with your material.
  2. Your dose plan fits the TDS guidance.
  3. Your team has the PPE listed in the SDS.
  4. Storage temperature and shelf life suit your schedule.
  5. You know how to dispose of leftover material and rinse water.

Then follow our graphene additive trial guide and check dispersion stability and storage.

How often are the documents updated?

Documents are revised when formulations, regulations or test information change. Before each trial and before each production order, confirm you have the current revision, and keep the version you used with your trial records. If your quality system needs lot documentation, ask for it when you request the quote so it ships with the product.

Where can I get the documents?

Each store product page has TDS, SDS and sell sheet downloads. For the latest versions, lot documents or a specific language or format, use the quote, sample and spec sheet request form.

Frequently asked questions

Is the TDS the same as a specification?

The TDS describes the product and how to use it. Lot-specific values, such as ThermaGraph's graphene content, appear on the certificate of analysis.

Why do two graphene products have different SDS hazards?

Usually because of the carrier. Water, solvent, resin and oil carriers have different hazards.

Do I need special equipment to mix the additive?

No. Our additives are pre-mixed. Mix until uniform with your normal equipment, following the TDS.

Can I get the SDS in another language?

Tell us if your market needs a specific language or format when you request a quote.

Request a quote, samples or a spec sheet

Tell us your material, the property you want to improve, the carrier you use (water, solvent, resin or oil) and your volumes. Pricing and samples are by quote. Call 704-659-3682 or request a quote, samples or a spec sheet / SDS.