Graphene Rebar: In Development
Graphene rebar is an in-development extension of our concrete solution. It is not a product yet. Our concrete additive comes first: our graphene concentrate increased concrete's compressive strength by 67.7% in independent third-party testing in 2023 with a 5% addition by weight of cement (graphene in concrete).
What we are developing
Building on the concrete work, we are developing graphene-based reinforcement rods intended as an alternative to steel rebar. The goals we are working toward are reinforcement that:
- is lighter than steel, for easier handling;
- doesn't rust, so it can't cause the corrosion damage that steel rebar can cause in concrete;
- works with graphene-enhanced concrete as one system;
- can be made in the USA.
What we can and can't claim today
We don't yet have published test data for graphene rebar, so we make no claims about its strength, weight, cost or service life compared with steel. Any reinforcement product would need to be tested and approved under the codes and standards that apply before use in structures.
Our verified concrete results are the 67.7% compressive strength gain at 5% by weight of cement and increased water resistance by 25% in independent third-party testing in 2023.
Learn more
Interested in testing or development work? Contact us.
See the graphene products we supply today.
Concrete strength and embodied carbon
The additive strength result below is not a rebar test or a demonstrated environmental benefit of the in-development reinforcement.
Cement is the binder in concrete. Its production releases CO₂ through limestone conversion and energy use, as explained by the IEA. That makes cement quantity an important part of a concrete carbon assessment.
GI’s additive achieved +67.7% compressive strength in third-party testing at the tested 5% supplied-additive dose by cement weight, not 5% pure graphene. This validated strength result supports investigating lower-cement mixes; it does not establish how much cement can be removed. Candidate mixes must meet the same required performance.
Conditional example: if 100 kg of Portland cement is actually avoided at the same required performance, gross avoided cement A1–A3 impact is 100 × 0.919 = 91.9 kg CO₂e. The 100 kg is an example assumption, not a reduction demonstrated by GI. The official US industry-average Portland cement EPD, revised July 2026, Table 4, gives 0.919 kg CO₂e/kg using 2019 production data, covering A1–A3, raw materials through manufacturing—not a current-year plant measurement or whole-life concrete footprint. CO₂e means carbon dioxide equivalent.
This is gross avoided cement-production impact, not measured GI net savings. Net savings require matched-performance mix validation and a consistent lifecycle comparison including additive manufacture, carrier, packaging, transport and all changed mix inputs. Unknown additive impacts are not zero. The strength result does not automatically establish cement reduction, longer service life or carbon capture.
