Unlabeled spray bottles, a paint can, a red tube, a coated pan and a dark jacket

"Graphene-enhanced" means a product contains some graphene or a graphene-related material, but the label alone does not say what material, how much, or whether it changes performance. To evaluate a claim, ask what graphene material is used, at what dose, which property was tested, by which method, against what baseline, and whether the testing was independent or internal.

Graphene has a strong reputation, and that makes clear evidence more important, not less. This checklist works whether you are a buyer, a formulator or a brand owner.

Why are graphene claims hard to compare?

"Graphene" covers several materials. Single-layer graphene, few-layer sheets, graphene nanoplatelets, graphene oxide and reduced graphene oxide all behave differently. Our article on graphene vs graphene oxide vs rGO explains why. Claims also mix laboratory research, product tests and marketing language, and research numbers from one material are sometimes quoted for another.

What questions should I ask about a graphene claim?

  1. What material is it? Graphene, graphene oxide, rGO or another carbon?
  2. How much is in the product? As supplied additive and, where relevant, as graphene content.
  3. Which property was measured? Wear, strength, heat transfer, barrier or conductivity.
  4. Which test method? A recognized standard, such as ASTM D4172 for four-ball wear, makes results easier to interpret.
  5. Compared with what? The same product without graphene is the fairest baseline.
  6. Who tested it? Independent or internal, and is the report available?
  7. Does it match your use? A lab coupon is not the same as a field application.

How does Graphene Integrations label its results?

We publish results only when we have the data to back them, and we state how each was obtained:

  • Concrete: +67.7% compressive strength at 5% by weight of cement, in independent third-party testing (2023). The dose is 5% supplied additive by cement weight, not 5% pure graphene.
  • Lubricants: up to 42% smaller four-ball wear-scar diameter and 26% higher weld load, in independent lab testing, using graphene integrated into oleic acid and monomer, dosed at 1% to 7%.
  • Data center coolants: ThermaGraph™ showed +6% to +18% higher convective heat transfer coefficient than a glycol baseline, which are internal testing results, not independent results.

Where we do not have data, such as plastics, batteries or outdoor gear, we say so. See our case studies.

What does a strong claim look like?

A strong claim names the product, the dose, the property, the method, the baseline and who tested it, and it limits itself to what was measured. For example, a concrete strength result does not by itself establish a carbon saving; our concrete and embodied carbon guide explains why a matched-performance mix and a full life-cycle comparison are needed.

What are warning signs in a graphene claim?

  • No dose or graphene content stated.
  • Results quoted from research papers using a different material.
  • Percentages without a baseline or test method.
  • Very broad claims, such as "stronger, lighter and longer-lasting", without data for each.
  • No way to get the test report or SDS.

How do I verify a claim in my own product?

Run your own trial. Make a fresh baseline batch, add the graphene product at two or three dose levels, change nothing else and measure the property with the same method as your baseline. Our graphene additive trial guide and how to choose a graphene supplier help you plan it.

What if I want to make graphene claims for my own product?

Base them on testing of your finished product, describe the method and baseline, and avoid transferring results from other materials or other people's products. We can help you plan testing with our additives; request samples.

Frequently asked questions

Does "graphene-enhanced" guarantee better performance?

No. It only indicates that graphene is present. Performance depends on the material, dose, dispersion and formulation.

Are internal test results unreliable?

Not necessarily, but they should be labeled as internal so readers can weigh them. Independent testing adds confidence.

Why does the dose matter so much?

Too little graphene may have no measurable effect, and too much can change viscosity or processing. Claims without a dose are hard to evaluate.

Can I get Graphene Integrations' test summaries?

Yes. Request a summary of our test results through the quote request form.

Request a quote, samples or a spec sheet

Tell us your material, the property you want to improve, the carrier you use (water, solvent, resin or oil) and your volumes. Pricing and samples are by quote. Call 704-659-3682 or request a quote, samples or a spec sheet / SDS.