Graphene Coolants for Data Centers

Category: Data Centers

Date: Friday, October 30, 2026

Graphene Coolants for Data Centers

Liquid cooling is becoming standard for high-density AI and HPC racks. We developed two graphene coolants for it: ThermaGraph, a water-based coolant for direct-to-chip and water loops, and ThermaGraph-D, a dielectric fluid for immersion cooling.

ThermaGraph improved heat transfer by +6% to +18% (internal testing results). Modeled cooling-energy savings for ThermaGraph are 10–29%; these are modeled, not measured, results. ThermaGraph-D is used at 0.05–0.20% graphene; read its safety data sheet before use.

See data center coolants or request a quote or samples.

From heat-transfer performance to an efficient cooling loop

ThermaGraph™ is a complete water-based fill for suitable closed loops, with 0.5–1.5 wt% graphene in the supplied fluid—not a top-off dose. GI’s +6–18% higher convective heat-transfer coefficient versus a glycol baseline comes from internal pumped-loop tests. It is not independent field validation or an equivalent percentage electricity saving.

Turn that promising thermal result into a plant decision by comparing the same heat load and operating conditions. Log flow, inlet/outlet temperatures, pressure drop, pump, fan and chiller electricity; inspect filters, corrosion coupons and material compatibility. Water-based ThermaGraph is not a dielectric and must not immerse live electronics.

DOE’s liquid-cooling evaluation illustrates system-level metering; it did not test GI fluid. Assess environmental outcomes using measured kWh, the actual electricity mix, fluid manufacture, replacement, transport and disposal. Improved heat transfer is an opportunity to optimize the system, not a measured GI carbon footprint.

Research / measurement reference · Continue with the application guide