Graphene in Hunting and Outdoor Gear
Hunting and outdoor gear has to stay light, last through rough use and cope with cold, wet weather. Graphene is being researched and used across the outdoor industry as a small addition to fabrics, coatings, rubbers and composites. We supply graphene already dispersed in water, solvents and resins, so gear makers can test it in their own materials.
Where graphene is being explored in outdoor gear
- Apparel and insulation: graphene coatings and fibers can spread heat more evenly across a fabric. Some outdoor jackets and base layers already use graphene for this.
- Water and wear resistance: graphene in fabric coatings is studied for better barrier properties and abrasion resistance.
- Footwear: graphene-enhanced rubber has been used in commercial hiking and running shoe outsoles for grip and wear life.
- Composites: graphene in resins and fiber composites is studied for stiffer, tougher parts, such as bow limbs, arrow shafts, frames and cases, with the aim of saving weight.
- Coatings for metal gear: graphene coatings are researched for corrosion and scratch protection.
What we can and can't claim today
We don't yet publish test data for graphene in hunting or outdoor products, and we don't make claims about camouflage, temperature regulation or moisture wicking. Results depend on the base material, the graphene grade and how well it is dispersed, so every product needs its own testing.
Our verified results so far are in other materials: a 67.7% gain in concrete compressive strength at 5% by weight of cement in independent third-party testing, up to 42% smaller four-ball wear-scar diameter and 26% higher weld load for a lubricant in independent lab testing, four graphene car care products developed with ITW for Rain-X and Black Magic (ITW case study), and graphene-integrated composites developed with a DoD contractor and evaluated with V50 ballistic testing (press release).
Related reading
- Graphene in textiles
- Graphene in fabric
- Graphene in consumer goods and sports equipment
- Graphene armor composites
Contact us to test graphene in your fabric, coating or composite.
Build textile function that survives real use
Graphene textile additives can be investigated for conductive or thermal functions through a compatible finish or coating. Published reduced-graphene-oxide ink research demonstrates the importance of the binder–fiber interface and bending; rGO is not GI’s material and those results do not establish GI wash life or health benefits.
Agree the supplied-additive dose, carrier and application route for the fiber. Evaluate add-on mass, handle, breathability, color, resistance or thermal behavior before and after relevant washing, abrasion and flexing. Include release and exposure assessment where the intended use requires it.
Resource efficiency depends on retained function under actual care and service conditions. Compare manufacturing water and energy, coating losses, washing/drying needs, replacement frequency and end-of-life, including additive and carrier impacts. No antibacterial, medical, guaranteed energy-saving or certified low-carbon outcome follows from graphene inclusion alone.
Research / measurement reference · Continue with the application guide
